Refrigeratori aria-acqua e pompe
di calore per climi miti e medi
version
inverter
Refrigeratori e pompe di calore dotati di tecnologia full inverter che integra compressori inverter, valvola di espansione elettronica e ventilatori elettronici a velocità variabile per il massimo risparmio energetico e la conformità agli standard ErP 2021.
Questa gamma integra i compressori, il gruppo idraulico e il serbatoio tampone incorporati nella vena d’aria, offrendo una versione molto compatta.
version
euro
Refrigeratori e pompe di calore dotati di compressori multiscroll tandem o trio per ottimizzare il risparmio energetico e rispettare le norme ErP 2021.
Questa gamma integra i compressori, il gruppo idraulico e il serbatoio tampone incorporati nella vena d’aria, offrendo una versione molto compatta.
Hydraulic versions:
KWE – Standard version (S)
Equipment with no hydraulic unit. The KWE equipment has triple protection of the plate heat exchanger because, as
standard, it comes with a flow switch in the water piping, water antifreeze protection and freon antifreeze protection.
KWE – Version with hydraulic unit (P)
Integrated hydraulic unit composed of a circulation pump suitable for water or glycol water to 0°C, expansion
vessel, bleed and stop valves, pressure gauges and a flow switch. For water temperatures lower than 0°C, the low temperature kit is required, which requires replacement of the pump and adds electrical resistors to the hydraulic elements for work with water temperatures as low as -10°C
KWE – Version with hydraulic unit and buffer tank (H)
Equipment designed with a hydraulic unit in addition to a buffer tank with an antifreeze
electrical heater to reduce compressor short cycling. The hydraulic unit is built into the unit’s chassis in all models. H version in series 4 and 6 does not alter the dimensions of a standard unit. Optionally, a module independent to the equipment may be delivered, with a 375 or 725 litre capacity buffer tank and antifreeze resistors.
For water temperatures below 0°C, it is necessary to request the low-temperature kit for the hydraulic unit.
PACIFICA series includes the AQUAMANAGER programmable electronic control, specifically developed for the management of air-to-water and water-to-water equipment with the pGD1 user and maintenance terminal.
CONTATTATECI
Come possiamo aiutarvi?
Siete alla ricerca di soluzioni HVAC+R (su misura) o avete domande?
Non esitate a contattarci.